Yonker 3 Channel ECG Machine 7inch Display With Touch Screen
Features
- Modern in design, light in weight, compact in size.
- Simultaneously acquisition of 12 lead, full screen display of 12 channel ECG waveforms.
- 7 color screen, both push-button and touch operation
- Sensitive filters of ADS, HUM, and EMG.
- Automatic measurement, calculation, analysis, waveform freezing. Auto-analyze and auto-diagnostic can reduce doctorās burden and improve working efficiency.
- Automatic adjustment of baseline for optimal recording.
- Thermal printer with 80mm print paper, synchronization print.
- Lead off detection function.
- Built-in rechargeable li-ion battery (12V/2000mAh), AC/DC power conversion. Adapt to 100-240V, 50/60Hz AC power supply.
- Historical data and patientās information can be reviewed and printed. The machine can store over 500 ECG reports in its built-in flash.
- USB communication interfaces ļ¼optionalļ¼.
Functions are as follows: recording and display-ing ECG waveforms in auto/manual mode; auto-measuring and auto-diagnosing the ECG wave parameters; save patient data into machine, USB driver automatically(optional), prompting the state of lead off.
Color TFT display
The high resolution hot array output system is adopted
The electrode with bad contact can be accurately determined and the corresponding position can be.
The design conforms to the IECI type CF safety standard, and the ECG amplifier is fully floated
A flexible output print format
Standard external input output interface and RS-232 communication interfac
3 or 6 or 12 lead synchronous acquisition, synchronous amplification, three frack record
The daily consumables are greatly saved.
Accessories
1 x device
1 x Li-Battery
1 x Power line
1 x Earth wire
1 x Userās Manual
1 x Blood oxygen probe (for SpO2, PR)
1 x Blood pressure cuff (for NIBP) 1 x ECG cable (for ECG, RESP)
1 x Temperature probe (for Temperature)
- Input circuit Floating, Protection against defibrillator effect
- Voltage toleranceļ¼Ā±500m V
- Time constant:ļ¼3.2s
- Frequent responseļ¼ 0.05Hz~150Hz
- Input Impedanceļ¼ ļ¼50MĪ©
- Input Circuit Currentļ¼ ā¤ 0.1Āµ A
- Patient Auxiliary Currentļ¼: < 10Āµ A (220V-240V/50Hz)
- CMRR: ā„ 100dB, with AC Filter
- A/D ResolutionA/D: 12bits/1000HZ
- Acquisition Mode:Simultaneously acquisition of 12 lead, full
- screen display of 12 channel ECG waveforms.
- Sensitivityļ¼5ļ¼10ļ¼20mm/mV
Reviews
There are no reviews yet.